DSPA406-TDA
The 6ch DSP with built-in 4ch power amplifier comes with a dedicated harness for each vehicle model
DSPA406-TDA is a kit specific to each vehicle model that comes with a harness for Toyota display audio.
Achieve audio upgrade with coupler on.
Rated output 30W×4(4Ω)
Frequency characteristics 20Hz to 40kHz
High level input 4 systems
RCA input 4 systems
Speaker output 4 systems
RCA output 6 systems
Input sensitivity High level max. 10V: Low level (RCA) max. 2.8V
Input impedance 6Ω
S/N ratio 105dB
AUX No input
Bluetooth 5.0 compatible (aptXHD/aptX/AAC/SBC)
Size (width x depth x height) 180mm x 129mm x 42mm
Recommended fuse capacity 10A
Harness for Toyota display audio Attached (28pin-10Pin, approx. 2m)
Compatible with remote controller (sold separately)
*Compatible with genuine display audio system. Vehicles equipped with audio systems such as JBL are not compatible.
Please make sure that a 28pin-10pin harness is installed.
| Number of output W W×CH | 30W×4CH |
| Number of external pre-outs | ◎ |
| optical input | |
| Number of channels | 4ch |
| Number of high level input channels | 4ch |
| High level mix function | presence or absence |
| Bluetooth | Direct Bluetooth available |
| [Compatible car models] | Vehicles equipped with display audio such as Yaris Cross, 60 series Prius, 3rd generation Sienta, etc. |