“Sound Control Tower” Exceeding the limits of genuine sound.

This is an 8ch power amplifier with a built-in 9ch DSP.
A new generation processor amplifier that achieves high power and ultra-low power consumption with Class GD operation.
UP 8DSP has 6 channels of high level input, and if you use MEC ANALOG IN, you can achieve a total of 8 channels of high level input.
Also, the input signals can be mixed up to 4 systems and the level can be adjusted, and the output of the genuine multi-system can be synthesized into a signal close to the full range.

Equipped with a high-quality Burr-Brown 24-bit A/D/D/A converter and a high-quality operational amplifier, it has achieved amazing performance with a harmonic distortion rate of less than 0.03% and an S/N ratio of more than 106 dB. Masu.

Channel mode 6ch + 2ch + 1ch (pre-out)
Output power 65W RMS x 6ch 4Ω (front/rear/center)
160W RMS x 2ch 2Ω (subwoofer)
Damping factor 100 or more
Input sensitivity High level: 2.8V ~ 11.0V
Input impedance 9 ~ 33Ω ADEP-3
Auto power on function compatible (ON/OFF switch is equipped on the side panel)
Optical digital Input Square TOS x 1 system (SPDIF: 6-96KHz/24bit)
Frequency characteristics (+0/-1dB) 20-22KHz
Harmonic distortion rate 0.03%
DSP 64bit processor, clock frequency: 295MHz
Operating sample rate 48KHz/24bit
A/D converter High sound quality 24bit Burr Brown
D/A converter High sound quality 24bit Burr Brown
SN ratio 106dB or more (when digital input) 104dB or more (when analog input)
Output level 5.0dB to -30dB
Level adjustment step for each part 0.10dB / step
Time alignment step 7.1mm / step
Operating power supply voltage 10.5V to 17.0V NL>MEC input Optional MEC card
Input/output terminal Dedicated 20-pin, 8-pin connector
SPC terminal, USB mini terminal (for PC connection)
Idling current 380mA
Remote output current 500mA (maximum)
Fuse MINI 25A×2
External size W×H×D 153×46×130(mm)
Weight 1.2 Kg
Accessories Connection cable set

Power connector
>
USB cable 1.8m, SCP to MINI DIN conversion cable

Mounting bracket